---
title: "Boeing 787 PECS Heat Exchanger Cleaning & DAR Repair | QTC Case Study"
description: "How QTC supports Boeing 787 operators with off-wing PECS heat exchanger cleaning and DAR leak repair under the MPD 21-071-00 restoration task — a B787 maintenance case."
url: https://qtc.aero/resources/case-studies/boeing-787-heat-exchanger/
---

Case Study

# Boeing 787 PECS Heat Exchanger Cleaning & DAR Repair

Boeing 787 · PECS Heat Exchanger

1. [Home](https://qtc.aero/)
2. [Resources](https://qtc.aero/resources/)
3. [Case Studies](https://qtc.aero/resources/case-studies/)
4. Boeing 787 PECS Heat Exchanger Cleaning & DAR Repair

Customer: **Aircraft Asset Management (AAM)**, Gordon Jarratt, Chief Executive Officer

## The Challenge

The Boeing 787 has a restoration (RST) task, **MPD 21-071-00**, which drives the **heat exchangers (HX) off-wing for cleaning every three years**. The 787’s Power Electronics Cooling System (PECS) uses these heat exchangers — along with two PECS pumps and four package motor controllers (PMCs) located in the left and right wheel wells — to keep the aircraft’s power electronics within temperature limits.

Removing the heat exchangers is not a casual task. Operators have to be mindful during removal: take off the right-hand side and the aircraft cannot be powered on. For an operator that is **not** covered under a comprehensive global fleet-care program, this recurring scope has to be managed directly — which means finding a repair station that can clean the HX elements properly and, critically, repair them if they leak.

## The Solution

Gordon Jarratt, Chief Executive Officer at **Aircraft Asset Management (AAM)**, pointed 787 operators to QTC for exactly this work. In his words:

> “If your A/C is not under Global Fleet Care, there is a superb shop in Upland, CA, called Qualified Technologies which can clean the HX elements and they can also issue a DAR repair if they leak.”

QTC cleans the 787 PECS heat exchanger elements to restore cooling effectiveness, and — where an element is found to leak — can develop and issue a **DAR repair** rather than condemning the unit. For an expensive, flight-important component, that is the difference between a serviceable return and a costly replacement.

## Our Process

QTC approaches each 787 PECS heat exchanger the way it approaches all heat-transfer hardware: incoming inspection and documentation, thorough cleaning of the core and element passages to clear fouling, and leak and pressure evaluation to find any breaches in the brazed structure. Where a leak is found, our engineers develop the appropriate repair and validate it before the unit is certified and released.

This capability is rooted in QTC’s founding background — our team includes former Hamilton Sundstrand and Honeywell ECS engineers who understand heat-exchanger design, fabrication, and repair development from the OEM side.

## The Outcome

For 787 operators managing the MPD 21-071-00 interval outside of a fleet-care program, QTC provides a certified, cost-effective path to keep PECS heat exchangers in service: cleaned to restore performance, and repaired — not scrapped — when they leak. A public recommendation from an aircraft asset management CEO is the kind of trust signal that only comes from delivering on exactly this kind of work.

## About This Component Repair

Heat exchanger cleaning and leak repair is one of QTC’s core capabilities. Learn more about our [aircraft heat exchanger repair and overhaul](https://qtc.aero/capabilities/heat-exchangers/) , or read our guide to [how aircraft environmental control systems work](https://qtc.aero/resources/how-aircraft-ecs-works/) .

[About QTC's Heat Exchangers Capability →](https://qtc.aero/capabilities/heat-exchangers/)

## Frequently Asked Questions

**What is the Boeing 787 MPD 21-071-00 task?**

It is a restoration (RST) Maintenance Planning Document task that drives the 787's heat exchangers off-wing for cleaning on a recurring interval. Operators not covered by a comprehensive fleet-care program manage this scope through a qualified repair station.

**Can QTC clean and repair Boeing 787 PECS heat exchangers?**

Yes. QTC cleans the 787 PECS heat exchanger elements and, where an element leaks, can issue a DAR repair, under our FAA & EASA Part 145 approvals.

**Why is heat exchanger cleaning important on the 787?**

The Power Electronics Cooling System keeps the 787's electrical and electronic systems within temperature limits. Fouled heat exchangers lose effectiveness, so periodic off-wing cleaning restores cooling performance and protects downstream equipment.

## Request a Quote

Send us your part numbers and condition. Our engineers respond with repair scope, turnaround, and pricing.

[Request A Quote](https://qtc.aero/pending-quote/) · [Contact QTC](https://qtc.aero/contact/)

## Contact Qualified Technologies Corporation

All work is quoted: send a part number for a repair or overhaul quote.

- Phone: [909-981-0895](tel:+19099810895)
- Fax: 909-981-0962
- Email: [sales@qtc.aero](mailto:sales@qtc.aero)
- Request a quote: https://qtc.aero/contact/
- Search the part catalog: https://qtc.aero/shop/
- Address: 2133 Aviation Drive, Upland, CA 91786
